|
850-941-2080
| |
|
MX5 Super
Bike Engine
Scroll down for detailed information
NO LONGER AVAILABLE
Shipping and Handling $15.00 |
| Specifications: |
|
| Length (w/o muffler) |
14.0" |
| Width |
7.25" |
| Height |
8.75" |
| Dry weight (engine only) |
6.7kg (14.8 lbs) |
| Engine type
|
Two cycle, single cylinder, forced air-cooled |
| Displacement |
33.6 cc |
| Output |
1.93ph at 6,500 rpm |
| Ignition |
Breakerless electronic |
| Carburetor |
Float type |
| Fuel |
Gasoline & 2-cycle oil, 25 to 1 |
| Fuel capacity |
1.25 liters |
| Fuel consumption |
75km/liter (100 + mpg) |
| Clutch |
Automatic centrifugal |
| Drive system |
Friction roller |
| Maximum speed |
25 to 30 mph |
|
Motorized Power for bikes . . .
MX-5 Frame
Requirements
26 Inch Wheel Diameter
19 Inch Frame or TALLER!
Click Here for Larger Picture
The
three critical frame measurements required for mounting the MX-5 Superbike
Engine are:
-
9 inches minimum when measuring between the end of the pedal crank
arm (when pointing straight up at 12 o clock) and the bottom side of
the top horizontal frame tube.
-
The vertical frame tube (that runs from the seat to the pedals)
should measure 1 1/8 inches diameter (it's width). If measuring this
tube's circumference (measuring around the tube), the correct
measurement would be 3.53 inches (just barely
over 3 1/2 inches).
-
The space between the previously mentioned vertical frame tube and
the rear tire tread surface (measured at the closest point that they
come to each other) should be no closer than 2 inches, but not greater
than 3 3/8 inches from each other.
Note: By changing the pedal crankset to a wider or shorter crankset, you
can gain the required frame heigth (9 inches), if necessary. A shorter
or wider crankset will also allow you to mount the engine lower. The
ability to mount lower will allow you to drive a tire spaced further
away than 3 3/8 inches because the tire surface comes closer to the
vertical frame tube as you move the engine mount down on the tube.
|
|
Well balanced and Easy
to Install
|
|
Motorcycle style speed control
Convenient engine stop switch
|
|
It is extremely fuel efficient with over 150 miles per gallon
and will power a bicycle with speeds of up to 25 to 30 miles per hour. Just release the lever mounted on the handle bars to lower the engine onto the
rear tire while pedaling. The motorcycle style twist-grip controls the
speed.
With the Mx-5 Superbike engine you now have the option of
power assisted cycling or normal pedaling, all with a simple flick of a
lever. The Mx-5 Superbike engine is a 33.6 cc., two-stroke, forced
air-cooled engine with electronic ignition, which means very low
maintenance.
|
| |
Fax: 850-941-2038
|